Smooth the installation area by removing nails, screws or other fixtures from the wall and ensure the wall is clean and level. Unbox your packages and check all the panels before beginning the installation.

1) Mark the panel at the desired length using a pencil and straight edge.

2) Cut the panel horizontally using a fine-toothed hand or circular saw.

3) Cut the acoustic felt backing vertically with a sharp utility knife.

Bond directly to wall

Apply wavy lines of hybrid grab adhesive on the back of your panel. Each panel needs approx. 100ml of adhesive. Carefully position the panel in place and firmly press all parts onto the wall.

Fix with screws

Using the screw pack provided we recommend 15 screws per panel in 5 rows of. Ensure appropriate fixings for the installation surface e.g. concrete/plasterboard plugs. For maximum acoustic performance, install the panels onto 45mm deep battens with suitable insulation between each batten